Wiki Page: How to Build Linenumber (Linenumber+Size+Spec) and add in...
Opcfhdr.ebs needs to be modified for building linenumber (lineno.+size+spec) and to add this linenumber in backing sheet coordinates need to be defined in position (POS) file. Steps to Accomplish: Go...
View ArticleWiki Page: How to Change HVAC Pressed Elbow Radius 1.5 D to 1D
Based on projects requirement to use HVAC pressed elbow radius 1.5D to 1D, below are modification required in AutoPLANT. Steps to Accomplish: Go to Start All program Bentley Plant V8i Tools Class...
View ArticleWiki Page: Processing - Bentley OpenPlant Isometrics Manager
Processing - Bentley OpenPlant Isometrics Manager
View ArticleWiki Page: Exporting Bill Of Material in CSV format file from OpenPlant...
Extraction of Bill of material can be customized. It will make it easier for the user to extract the report from isometrics Bill of Material/Quantity report and to generate CSV file thus providing...
View ArticleWiki Page: How to Remove Duplicate Annotation For Reducing Flange from Line...
While generating Isometrics, a pipeline containing reducing flange from 'Line Pipe Module', annotation shows twice in isometrics, To remove duplicate annotation below are the steps. Refer below...
View ArticleWiki Page: Setting File Type (DGN or DWG) and Paper Setting
File / Paper Settings File Format The file format can be toggled between DGN and DWG on the Isometric Management tab of the Isometrics Configuration tool. Open the Isometrics Configuration tool...
View ArticleWiki Page: Show Component Tagging in OpenPLANT Isometric.
Tagging of various Fittings and Components assigned in Auto Plant need to show up in OPIM. To see the Tags in OPIM below steps to be followed: Assigning Tag to Valve. 1 . In Auto Plant while user...
View ArticleWiki Page: Lap Joint Stub End Dimension
Dimension Stub End: By default the lap joint stub end component dimension at its flange end part. See image below: To Dimension Lap Joint stub end from End point below is the customization which is...
View ArticleWiki Page: Modifying Weld Symbol Size
Weld symbols appears at the joint where two components get weld. To highlight the joint, weld symbols are used. Sometimes it is required to have a big symbol size while issuing it for fabrication at...
View ArticleWiki Page: Modifying Text and Annotation Settings
Text and Annotations Text nodes are placed in the seed file as placeholders for attributes and reports on the drawing. The text nodes also set the properties for the text, such as font, size and...
View ArticleWiki Page: Modifying the Welding Information
Welding Weld Summary Report A weld summary report can be created by adding the CT_WELD component type to the INCLUDE keyword in the report as follows: INCLUDE = IE_TYPE=CT_WELD COLUMN = 6:C:WELDID...
View ArticleWiki Page: Modifying the Iso Content
Iso Content North Direction The north direction and label formats can be set for each Isometric Style. Use the steps below to set the north direction. Open the Isometrics Configuration tool From...
View ArticleWiki Page: Modifying Symbols
Symbols Isometric symbols used on Isometric Drawings are stored in cell libraries. Based on company requirements an Administrator will need to modify existing symbols or to create completely new...
View ArticleWiki Page: Modifying Rectangular enclosure/Boundary in Open Plant Isometric...
To Remove the Rectangular Boundary in Open Plant Isometrics, user can use the custom.cel file to store its custom cell and use it whenever required. Steps To Accomplish: In seed file, go to...
View ArticleWiki Page: Mapping New Component
AutoPLANT component class needs to be properly mapped to the most suitable component classes available in the Open PLANT 3D schema to avoid below error . For example, Mapping of new component, say...
View ArticleWiki Page: Modifying Dimension Styles
Dimensioning Dimension Styles Dimension definitions (styles) are configured in the isometric seed file. Although...
View ArticleWiki Page: Modifying Color, Line Style and Line Weight of Piping and Components
Symbology The Component Placement section in the Configuration Manager controls the color, line style and line weight of piping and components in the drawing. Open Bentley Project Administrator...
View ArticleWiki Page: Mapping of (AutoPLANT) Pipe Nozzle properties for use in Open...
In Auto PLANT, “Nozzle” can be place from piping module. If properties of piping nozzle to be available for OPIM, it needs to map these properties in the schema. Review property names in AutoPLANT In...
View ArticleWiki Page: Adding and Removing Isometric Styles
Isometric Styles In order to control generation of different types of Isometric Drawings, an administrator will need to define new styles and modify existing styles and their base default values...
View Article