Welding Weld Summary Report A weld summary report can be created by adding the CT_WELD component type to the INCLUDE keyword in the report as follows: INCLUDE = IE_TYPE=CT_WELD COLUMN = 6:C:WELDID In order to display the weld report on the drawing, it must be tied to a text node with the NODE keyword. Include Weld ID in the Report To include the weld id of the weld labels in your weld summary report, specify the WELDID keyword for one of the columns. The NODE keyword specifies the location of the report in the drawing. INCLUDE = IE_TYPE=CT_WELD EXCLUDE = IE_FIELD=0 COLUMN = 6:C:WELDID Dimensioning of Field Welds Dimensions always stop at field welds, which ensure cut lengths are properly defined. No user configuration available. Field Fit Welds Adding the over length of field fit welds is not yet implemented in OpenPlant Isometrics Manager. Weld Labels The User Labels section in the Configuration Manager is used to control the placement of Weld Labels in the drawing. Open the Isometrics Configuration tool From the Isometric Configuration dialog: Select the Isometrics Style tab Style – Select the relevant style from the dropdown Select User Labels from the tree Select Weld Labels
↧