Wiki Page: How To Create Various BOM Report Types in OpenPlant Isometrics...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.404 & above Environment: Windows 7 64 bit & Others Area: Settings/Attributes Subarea: Original Author: Rahul Kumar,...
View ArticleWiki Page: How to Accumulate Weight Information in the Bill of Material
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.440 Environment: Windows 7 64 bit & Others Area: Settings/Attributes Subarea: Original Author: Dinesh Solanki, Bentley...
View ArticleWiki Page: How To Show Total Weight for Bill Of Material in OpenPlant...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.440 Environment: Windows 7 64 bit & Others Area: Settings/Attributes Subarea: Original Author: Rahul Kumar, Bentley...
View ArticleWiki Page: How To Sort PARTID In OpenPlant Isometrics Manager BOM
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.404 & above Environment: Windows 7 64 bit & Others Area: Settings/Attributes Subarea: Original Author: Rahul Kumar,...
View ArticleWiki Page: Add End type Information in Isometric Bill of Material Cut list.
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX Environment: Windows 7 64/32 bit Area: Settings/Attributes Subarea: - Original Author: Abhijit Bute, Bentley Technical...
View ArticleWiki Page: To Display Additional Material Information in Drawing and Reports...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX Environment: Windows 7 64 bit Area: Settings/Attributes Subarea: - Original Author: Bentley Technical Support Group Overview...
View ArticleForum Post: RE: OPPID : off page connectors
I am having this issue as well. I am just beginning with this software, and am not sure how to know my drawing is in a database. I correctly created the project file and always enter data as prompted...
View ArticleForum Post: RE: OPPID : off page connectors
Hi Amber, My issue was mainly that I am not working with a data manager. The p&id's are all stand alone, that's why I don't have the possibility to connect to another connector. Sorry, can't help...
View ArticleForum Post: RE: OPPID : off page connectors
Hi Amber, You need to be connected to the database and synchronize the drawing in order to see the available connectors to link to. Regards, Harpreet
View ArticleWiki Page: How To Display only Support List in OpenPlant Isometrics Manager...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.440 Environment: Windows 7 64 bit & Others Area: Settings/Attributes Subarea: Original Author: Rahul Kumar, Bentley...
View ArticleForum Post: RE: In isogen material list 'N.S.' column, How do I add combine...
Hello Yogesh, Above naming is not possible using AutoPLANT Isogen. However, I would recommend you to try using OpenPLANT Isometric manager where there is huge scope to accommodate requirements like you...
View ArticleForum Post: RE: OPPID : off page connectors
Thanks, guys! This is our first task of the day: connect to a database!
View ArticleForum Post: Bentley Vision Displaying same Model Twice
In Bentley's Vision application (SS4) I have the same model/drawing appearing twice in the document tree, they have different document ids
View ArticleForum Post: RE: Bentley Vision Displaying same Model Twice
hello Jamie what does the doc-reg table look like ? Are there one or two drawings listed there ? Trying to determine if the fault is in Vision of ion the database.....
View ArticleForum Post: RE: Bentley Vision Displaying same Model Twice
RonnieP thanks for responding. I do not have access to our database, IT controls that. However, when I look in relationship manager there are two entries for the same drawing but different doc ids....
View ArticleForum Post: RE: OPPID : off page connectors
hey Guys - Once you have an off page connector in place, you can right click on it and select, Connect to Existing. But of course, as Harpreet stated, they must be in a database to be able to locate...
View ArticleFile: OpenPlant PID - How To Create Inline Reducing Valves
This document defines the steps necessary to create an inline reducing valve. I hope this helps, Tony DeRosa Bentley Plant
View ArticleWiki Page: Creating Inline Reducing Valves
Hello all, I documented the procedure for creating inline reducing valves. This will allow you to have inline reducing gate, globe and ball valves (Others can added as well). When placed on a pipeline...
View ArticleWiki Page: Weld Summary Report to Sum up the Welds According to the Weld Type.
Applies To Product(s): OpenPLANT Isometric Manager Version(s): 08.11.XX.XXX Environment: Windows 7 32/64 bit Area: Settings/Attributes Subarea: Original Author: Abhijit Bute, Bentley Technical Support...
View ArticleWiki Page: PIECE_MARK Information For All Components in Isometrics BOM
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.404 Environment: Windows 7 64 bit & Others Area: Settings/Attributes Subarea: Original Author: Rahul Kumar, Bentley...
View Article