Quantcast
Channel: OpenPlant | AutoPLANT
Viewing all articles
Browse latest Browse all 16985

Forum Post: RE: I need help creatin an angled pressure relief valve (inlet DN25 CL300 - outlet DN50 CL150) I can get it to show and connect at the DN25 end but not the DN50 end any help would be apreciated.

$
0
0
The main issue here is that most of the relief valves do have the correct pressure class but the text format is incorrect. Most ratings in the spec are listed as CL150 the relief valve has their rating with the text 150LB. Because the rating text is not the same they will not connect. Edit the relief valve to have the same naming convention as the other components. Also MAIN_SIZEs have the same issue some sizes are set to 50 and some are set to 50mm. They also need to match the same naming convention.

Viewing all articles
Browse latest Browse all 16985

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>