Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.564 Environment: Windows 7 64 bit & Others Area: Processing Subarea: Original Author: Rahul Kumar, Bentley Technical Support Group In OpenPlant Isometrics Manager, to open an intermediate file to review. Background In OpenPlant Isometrics Manager, each isometrics drawing produces an intermediate file along with other supported file. This Intermediate file with an L00 extension can be found under working isometric folder. User might use this file for reviewing and debugging purpose, which does not require any workspace or specific environment to open this file. Below steps will aid user to get it open in OpenPlant Isometrics Manager environment. Below described case is based on OpenPlant Modeler and OpenPlant Isometrics Manager. Steps to Accomplish Launch OpenPlant Isometrics Manager. From ‘Advanced’ option, Open Seed file. From ‘Utilities’ option use ‘Key-in’. Type isoext runl00 c:\AB.l00 in Key-in window to read an intermediate file. Where, isoext runl00 is a key-in c:\ - To specify a path where an intermediate file is kept AB.l00 – File name with an extension Note: Please mention the spaces and file path carefully. It will create a new DGN file and get saved in its corresponding working folder. Still a Problem If there is still some problem in using the key-in and opening an intermediate file, then please create a Service Request and contact Bentley Product Advantage group along with the list of all relevant details to get in depth analysis and for possible solution or workarounds. See Also Also check OpenPlant Isometrics Manager ‘HELP’ menu for details. Comments or Corrections? Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧