Applies To Product(s): OpenPlant Isometric Manager Version(s): 08.11.09.470 Environment: Windows 7 64 bit Area: Settings/Attributes Subarea: Original Author: Dinesh Solanki, Bentley Technical Support Group Introduction Currently OpenPLANT Isometric manager in Isometric generation does not pull the same spool id’s as assigned in the AutoPLANT Model. OpenPLANT Isometric manager automatically assigns spools based on flange and other connection criteria. Below steps can be used to get spooled from AutoPLANT to Isometrics. Mapping for Spool relation value. Modifying spool label definition in OpenPLANT isometric Configuration Manager. Steps to Accomplish Adding Property in the Schemas: Open schema OpenPlant_3D.01.04.ecschema In class editor and find “Device” class in the “Classes” tree and select it: With “Device” selected click “Properties” tab and click the “Add” button to add a new property: Specify a name for the new property, PIPING_NETWORK_SEGMENT. While PIPING_NETWORK_SEGMENT is selected in the properties list, click “Custom Attributes” and select “Add/Remove”. From the list of “Available Custom Attributes”, select “AutoPLANT_PDW_Property_Map” and click “OK”. Specify the AutoPLANT property name to be mapped: SPOOL. Save the schema file and close the class editor. Updating the Spool Label Definition Start AutoPLANT Project Administrator and open the project node of your active project. Go to the sub node for OpenPlant Isometrics/Settings and click the “Create/Modify” button On the Isometrics Configuration dialog select the “Isometrics Style” tab and then select the appropriate Style, e.g. “IFC”. Select “User Labels”/ Pipe Spool Labels. Change the “Text” property to “$(PIPING_NETWORK_SEGMENT)”. Note:- You may want to change the graphics of the label cell “SPOOLID” or Select a different cell to be used e.g.”NOTE”. For directions how to create new cells, please check the OPIM Help documentation – “Cell Creation Tool”. Also, report.def will have to be modified to accommodate SPOOL info in the BOM. See below results. See Also Comments or Corrections? Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧
