Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.440 Environment: Windows 7 64 bit & Others Area: Settings/Attributes Subarea: - Original Author: Rahul Kumar, Bentley Technical Support Group To show Existing element in OpenPlant Isometrics Manager. Background As per project requirement, user need to show few components as existing element in OpenPlant Isometrics Manager using OpenPlant Modeler. In Open Plant modeler user can set the existing pipeline using ‘Demolition’ option available at ‘STATE’ property. Below are the steps which will guide user to achieve required settings for existing line in Open Plant Modeler. Steps to Accomplish Launch Open Plant Modeler. Select piping systems that needs to separate components for setting new scope. Right click on pipe and click on ‘Modify Component’ option. From dialog box, set the ‘component state to ‘For Demolition’. See image below. Create Iso sheet using pipeline manager and generate isometrics to view the separated piping systems as dotted line in isometrics. See image below: Also in BOM reports you can extract segregate the component with ‘Component state’ field. See image below. Note: User can select group of component through Item tree and change the common property in one instance. Either by selecting different pipeline or by selecting group of components. See Also Check links below to show how to segregate fasteners and gaskets for existing lines in Bill of material in isometrics drawing. http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/19170.how-to-show-existing-lines-for-fasteners-in-openplant-isometrics-manager Comments or Corrections? Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧